Monitor AMI Powercon Specific
Complete monitoring system for the automatic, continuous measurement of the specific (total) conductivity.
- Complete system with dedicated transmitter, high precision conductivity sensor and flow cell with needle valve and digital sample flow meter
- Quick sensor release with patented slot-lock design
- Factory tested and ready for use
CLICK HERE FOR MORE INFORMATION
Monitor AMI CACE
AMI CACE is an economical, low-maintenance monitor that continuously measures conductivity - delivering reliability, efficiency and productivity for consistent measuring and gap free trend analyses
Your benefits:
- Save money and maintenance down-time because no resin changing or resin rinse down time is required
- Maximum instrument availability enables precise trend analyses giving you peace-of-mind
- Continuous monitoring of sample flow and sample temperature provides highest integrity of measured data
- Straight forward instrument set-up allows rapid plant integration
- Experience of more than 25 years in water and steam quality measuring online instruments make AMI CACE a secure investment for you
CLICK HERE FOR MORE INFORMATION
Monitor AMI Powercon-Acid
Monitor for continuous acid (cation) conductivity measurement.
- Complete system with dedicated transmitter, high precision conductivity sensor and flow cell with integrated cation column and automatic deaeration, needle valve and digital sample flow meter
- Nuclear grade cation resin has been rinsed down for immediate use
- Factory tested on wet bench. Ready for installation and start-up
Optional:
- Trail resin vessel and pre-rinse set-up for instantaneous resin exchange
CLICK HERE FOR MORE INFORMATION
Monitor AMI Deltacon Power
Complete monitoring system for the automatic, continuous measurement of the conductivity before (specific / total conductivity) and after a cation exchanger (acid / cation conductivity).
- Calculation of the sample pH value and alkalizing reagent concentration based on differential conductivity measurement.
- Calculation of the pH value and alkalizing reagent concentration in power plants by differential conductivity measurement (see appendix of VGB-directive 450L, edition 1988).
- Complete system with dedicated transmitter, two high precision conductivity sensors and flow cell, needle valve and digital sample flow meter.
- Simple exchange of resin cartridge; recommended for use with Swan rinsed nuclear grade resin for optional performance
CLICK HERE FOR MORE INFORMATION
AMI Deltacon Degasser
Triple channel conductivity monitor for specific (total), acid (cation) and degassed conductivity.
- Includes easy to swap cation column with rinsed nuclear grade resin.
- Calculation of the pH value and alkalizing reagent concentration in power plants by differential conductivity measurement (see appendix of VGB-directive 450L, edition 1988)
- Complete system with dedicated transmitter, three high precision conductivity sensors and two flow cells; one flow cell with integrated cation column, needle valve and digital sample flow meter.
- Sample reboiler unit with heating and cooling system made of stainless steel
- DG electronic controller for sample reboiler unit with vapor pressure control (IP66)
- Factory tested on wet bench. Ready for installation and start-up
CLICK HERE FOR MORE INFORMATION
Monitor AMI Sodium P; 40 cm
Complete sodium analyzer for feed water, steam and condensate
- Measuring range: 0.1 - 10'000 ppb for samples with pH ≥7
- Reliable alkalization reagent addition system for disopropylamine or ammonia with continuous pH monitoring
- Simple two-point calibration with storage of calibration history
- Easy and user friendly grab sample capability
- Dual sample stream to continuously determine dissolved sodium concentration for samples with pH ≥ 7.0
Optional: see AMI Sodium P; 28 cm
CLICK HERE FOR MORE INFORMATION
Monitor AMI Soditrace
Analyzer for the continuous measurement of sodium ions in trace amounts in high purity water applications and steam generation.
- Complete Sodium analyzer panel-mounted for easy wall installation.
- Lowest available detection limit for sodium ion concentrations of 0.001 ppb
- Programmable automatic calibration by multiple known standard addition at low levels
- Programmable automatic regeneration of sodium electrode (pat.pending).
- Automatic control of sample pH conditioning
- Automatic temperature compensation
- Continuous monitoring of reagent exhaustion, sample flow and sample temperature
CLICK HERE FOR MORE INFORMATION
Monitor AMI Silica
Complete monitoring system for the automatic, continuous measurement of silica in water steam cycles.
- Measuring range: 1 to 5'000 ppb
- Based on colorimetric measurement principle
- Complete system including: measurement and control electronics, photometer with integrated reaction chamber, flow indicator, reagent dosing system and reagent containers
- 2nd sample stream with switching valve as an option
- Optional communication interface
- Sample Sequencer for up to 6 sample streams as an accessory
CLICK HERE FOR MORE INFORMATION
Monitor AMI Silitrace
Complete monitoring system for the automatic, continuous measurement of silica in water steam cycles and high purity water.
- Measuring range: 0.5 to 1'000 ppb
- Based on colorimetric measurement principle
- Programmable, automatic calibration
- Programmable, automatic verification
- Easy to use grab sample capability
- Reagent saving mode
- Complete system including: measurement and control electronics, photometer with integrated temperature controlled reaction chamber, flow indicator, reagent dosing system and reagent containers
- Optional communication interface
- Sample Sequencer for up to 6 sample streams as an accessory
CLICK HERE FOR MORE INFORMATION
Monitor AMI Oxytrace
High precision monitor with three electrode Oxytrace G sensor for the continuous measurement of trace levels of dissolved oxygen in high purity water.
- Range: 0-20 ppm or 0-200 % saturation (at 25°C)
- Automatic air pressure and temperature compensation
- Short rinse-down time due to integrated guard
- Factory tested, ready for use
CLICK HERE FOR MORE INFORMATION
Monitor AMI Oxytrace QED
High precision monitor with three electrode Oxytrace G sensor for the continuous measurement of trace levels of dissolved oxygen in high purity water. Integrated auto verification with faraday electrode setup.
- Range: 0-20 ppm or 0-200 % saturation (at 25°C).
- Automatic air pressure and temperature compensation.
- Short rinse-down time due to integrated guard.
- Faraday electrode and control unit for the automatic or manual verification.
CLICK HERE FOR MORE INFORMATION
AMI pH-Redox; QV-Flow
Monitor for continuous measurement of pH or redox (ORP) in high purity water, steam and condensate. Complete system mounted on stainless steel panel:
- Measuring range: 1 to 13 pH respectively -500 to +1'500mV depending on installed sensor.
- Various combined or separated sensors with reference electrodes available.
- Flow cell QV-Flow IS1000 made of stainless steel with quick release vessel for easy calibration, needle valve, digital sample flow and temperature sensor.
Special features for high purity water with Nernst plus solution temperature compensation.
CLICK HERE FOR MORE INFORMATION
AMI Phosphate HL
Colorimetric process analyzer for the automatic, continuous measurement of phosphate.
- Measuring range: 0.1 to 50 ppm (mg/L) PO4
- Based on colorimetric measurement principle
- Complete system including measurement and control electronics, photometer, flow indicator, reaction chamber, reagent dosing system and reagent containers
- No interferences with silica
- Control of sample flow and reagent fill level
- Factory tested and calibrated. Provides immediate results
Optional accessory:
- Dual channel option for 2nd sample stream or AMI Sample sequencer for up to 6 sample streams
- Cleaning module-II
- Communication interface (RS-232, Profibus, Modbus, 3rd Signal Output, USB)
CLICK HERE FOR MORE INFORMATION
AMI LineTOC
On-line analyzer for the continuous measurement of Total Organic Carbon in pure and ultra pure water.
- Reagent-free measurement of TOC by UV oxidation and differential conductivity detection
- System suitability test according USP <643> and EP 2.2.44
- Automatic addition of standard solutions
- Automatic dilution of standards to 500 ppb TOC as Sucrose and to 500 ppb TOC as Benzoquinone
- Reaction Time: < 2 Minute
- Factory tested and ready for installation and operation
CLICK HERE FOR MORE INFORMATION
SWAN Wasseranalytik
© Droits d'auteur 2019. Tous droits réservés. SWAN Analytische Instrumente AG